Search
Shop Categories
    Menu Close

    Verus FR-S / BRZ / GT86 - Full Brake Cooling Kit

    SKU: A0037A
    Manufacturer: Verus Engineering
    $494.95
    $449.95
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    A well thought out and executed brake cooling kit which installs in an OEM type format with an emphasis on shortest route possible, maximizing cooling, and increasing the brake's ability to do their job by keeping them at a more reasonable temperature.  Using the OEM fog lights as the inlet to the kit and a well formed duct in the inner fender line this is the brake cooling kit to have.  At the knuckle the stainless backing plate and well formed carbon duct direct cool air into the center of the rotor to maximize cooling benefits.  Kit comes with everything necessary for an install, including pre-cut hoses to length.

    • Special Notes

       

      • OEM or similar fog light bezel is necessary for a seamless install.  Winjet sells these for FR-S for $20 for both sides, Subaru sells these for the BRZ for $40 for both units.
      • Depending on wheels/tires/suspension setup, steering rack limiters may need to be installed (included in kit).
      • In some severe cases backing plate may need trimmed.  IE: AP sprint kit with whiteline roll center adjusters due to lower control arm to rotor clearance being less than the thickness of the backing plate.  AP Sprint BBK will fit without trimming on stock ball joints.

       

    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    A well thought out and executed brake cooling kit which installs in an OEM type format with an emphasis on shortest route possible, maximizing cooling, and increasing the brake's ability to do their job by keeping them at a more reasonable temperature.  Using the OEM fog lights as the inlet to the kit and a well formed duct in the inner fender line this is the brake cooling kit to have.  At the knuckle the stainless backing plate and well formed carbon duct direct cool air into the center of the rotor to maximize cooling benefits.  Kit comes with everything necessary for an install, including pre-cut hoses to length.

    • Special Notes

       

      • OEM or similar fog light bezel is necessary for a seamless install.  Winjet sells these for FR-S for $20 for both sides, Subaru sells these for the BRZ for $40 for both units.
      • Depending on wheels/tires/suspension setup, steering rack limiters may need to be installed (included in kit).
      • In some severe cases backing plate may need trimmed.  IE: AP sprint kit with whiteline roll center adjusters due to lower control arm to rotor clearance being less than the thickness of the backing plate.  AP Sprint BBK will fit without trimming on stock ball joints.

       

    Customers who bought this item also bought
    Picture of Stoptech Scion FR-S/Subaru BRZ BBK 355x32 Red/Slotted Front -83.827.4700.71