Search
SHOP CATEGORIES
    Menu Close

    Motiv Concepts - Scion FR-S High Flow Catalytic Converter (HFC)

    SKU: MOT-SC.109
    Manufacturer: Motiv Concepts
    *
    *
    $359.99
    $323.99
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    2013 Scion FR-S / Subaru BRZ High Flow Catalytic Converter (HFC)

    Part #: SC.109

    Description:

    The all-new Scion FR-S has brought back the ‘sport’ in sports car, but its 200-hp may not be enough for you. So what better way to get a reliable boost in power than by getting it a Motiv Concepts High Flow Catalytic Converter? Constructed with 2.5-inch U.S. made RathGibson tube, the HFC is a quick install and bolts right in place of the factory catalytic converter. The 100-percent stainless steel construction is further highlighted by our signature brilliant brushed finish while the custom stainless steel bracket ensures a factory fit.

    Bullets:

    • 100-percent stainless steel construction
    • U.S. made RathGibson 2.5-inch tube
    • Signature beautiful brushed finish
    • Metallic Substrate Catalytic Converter (200-cell count) from Magnaflow
    • 3/8-inch thick stainless steel flanges
    • Includes all new gasket and hardware (rear exit uses factory donut gasket)
    • Complete bolt-on
    • Made in U.S.A. with Lifetime Warranty
    • Intended for off-road use only

    Please note that all products are designed as OE replacement units. Fitment may vary if you are running aftermarket headers and/or an aftermarket exhaust system. Please contact a sales representative if you have any questions.

    Fits: All 2013 Scion FR-S / Subaru BRZ Models

    Products specifications
    Attribute name Attribute value
    Piping Diameter 2.5" (63mm)
    Piping Material Stainless Steel
    Front Pipe Type High Flow Cat
    5.0 2
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    Colin | 1/2/2017 12:00 PM
    smart purchase!
    so i bought the catted FP to match w the Invidia N1 & honestly, sound difference, not to noticible but slightly louder. nothing crazy or ear busting but the noise is there. by far the EASIEST installation i have done to the car! i did struggle a little bit taking off one of the fasteners that was connected to the OP but nothing some WD40 & some elbow grease couldn't solve! no exhaust leaks & perfect fit for anyone that has an Invidia N1! highly recommend!
    Was this review helpful? Yes No (0/0)
    Wilberto | 1/10/2017 12:00 PM
    Perfect Addition
    Install was super easy. Good compliment with the Invidia N1. Gives the car a nice rumble, nothing cheap sounding. Build quality was perfect.
    Was this review helpful? Yes No (0/0)
    *
    *
    *
    *

    2013 Scion FR-S / Subaru BRZ High Flow Catalytic Converter (HFC)

    Part #: SC.109

    Description:

    The all-new Scion FR-S has brought back the ‘sport’ in sports car, but its 200-hp may not be enough for you. So what better way to get a reliable boost in power than by getting it a Motiv Concepts High Flow Catalytic Converter? Constructed with 2.5-inch U.S. made RathGibson tube, the HFC is a quick install and bolts right in place of the factory catalytic converter. The 100-percent stainless steel construction is further highlighted by our signature brilliant brushed finish while the custom stainless steel bracket ensures a factory fit.

    Bullets:

    • 100-percent stainless steel construction
    • U.S. made RathGibson 2.5-inch tube
    • Signature beautiful brushed finish
    • Metallic Substrate Catalytic Converter (200-cell count) from Magnaflow
    • 3/8-inch thick stainless steel flanges
    • Includes all new gasket and hardware (rear exit uses factory donut gasket)
    • Complete bolt-on
    • Made in U.S.A. with Lifetime Warranty
    • Intended for off-road use only

    Please note that all products are designed as OE replacement units. Fitment may vary if you are running aftermarket headers and/or an aftermarket exhaust system. Please contact a sales representative if you have any questions.

    Fits: All 2013 Scion FR-S / Subaru BRZ Models

    Products specifications
    Attribute name Attribute value
    Piping Diameter 2.5" (63mm)
    Piping Material Stainless Steel
    Front Pipe Type High Flow Cat
    Customers who bought this item also bought
    Picture of Perrin FR-S/ BRZ Steering Rack Lockdown
    Picture of Drive Shaft Shop - FRS/BRZ Manual 3'' Aluminum 1-piece Driveshaft
    Picture of 86 Speed Sticker

    86 Speed Sticker

    $5.50 $2.99
    Picture of Perrin Wing Riser Kit for 2017-2018 BRZ

    Perrin Wing Riser Kit for 2017-2018 BRZ

    **BEFORE AND AFTER PHOTO IN DESCRIPTION**
    $88.00 $79.20
    Picture of Perrin Lightweight Red Crank Pulley FRS/BRZ/86