DETAILS:

This is the DRL mode to keep the Winjet DRL bar on during low beam operation

This is a different version from the original DRL mod FT86 offered over a year ago when the winjet headlights were released - This one does not include the pin 

The function and quality of this DRL mod is the same as the previous version -  This is a lot less expensive and a bit easier for you to install.

SPECS:

This allows the DRL strip to operate normal, It also turns the DRL strip on with the parking lights and stays on with the low beam and high beam function

The DRL strip will operate normal. It will also power on with the parking lights and stay on with the low beam and high beam. it requires cutting one wire after the highbeam connector, and crimping the the piece in on each side heat shrinking the crimp (i used heat shrink butt connectors) then running the wire through a grommet and into the connector. Repin the drl wires as its backwards color wise from winjet.. Really easy, i have a video on a how to coming very shortly. I solder these in here at the shop, but as many people dont have use to solder equipment then this is the best/easiest way i could come up with. it takes about an hour for me to get a set done. I dont use any cheap china sourced components, all made here in the usa quality stuff, which cost more and why the price is as much as it is.


ITEM NOTES:

Watch this for proper wiring on a Winjet 

https://www.youtube.com/watch?v=_AN2bjUhMOE

APPLICATIONS:

SCION FR-S -ALL  with Winjet Headlights