Search
SHOP CATEGORIES
    Menu Close

    Diode Dynamics RGB 90mm Halo

    SKU: DD-SMD-5050
    Manufacturer: Diode Dynamics
    *

    $90.00
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    Diode Dynamics is proud to introduce a revolutionary new product: PRISM Multicolor LED bulbs, for direct replacement in any fog light or DRL application. By using an RGB controller, you can set them to any color imaginable, or use any lighting mode offered by the controller.

    The bulbs utilize bright 5050-size SMD chips and are designed to be a direct replacement for the factory bulb, with OEM-size sockets. The bulbs have been tested for reliability over time, with an expected life of 40,000 hours.

    This is an exclusive product, designed and developed by Diode Dynamics LLC.

    Installation:

    The whole system is 100% plug-and-play. No cutting, no ballasts, no wiring to your battery. Here's how to install:

    1. Remove your factory bulb, and replace it with the PRISM bulb.
    2. Plug the PRISM bulbs into an RGB controller. 
    3. Plug RGB controller into your factory socket, with included signal wire.

    It's as easy at that! Installation should take 10-15 minutes on most vehicles.

     

    Included in your order:

    • - (2) LED Halo Rings
    • - Power connector wire (plugs directly into your factory socket) 
    • - RGB Controller (optional, see below)
    • - Three-year replacement warranty

     

    You must use an RGB controller to power and control the bulbs. The bulbs use a standard 4-pin connector, with a common positive (+) wire.

    These bulbs are compatible with all other Diode Dynamics RGB products, such as their RGB controllers, RGB 2-way splitters, and RGB extension wires.

    All Diode Dynamics RGB controllers come with four (4) RGB outputs. For example, if you would like to purchase a set of PRISM bulbs for your fog lights and DRLs, you would just need one controller. If you already have an RGB controller for your footwell lighting, you can simply add these to that controller if you'd like. Keep in mind that all RGB lights on one controller will work together.

    0.0 0
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Diode Dynamics is proud to introduce a revolutionary new product: PRISM Multicolor LED bulbs, for direct replacement in any fog light or DRL application. By using an RGB controller, you can set them to any color imaginable, or use any lighting mode offered by the controller.

    The bulbs utilize bright 5050-size SMD chips and are designed to be a direct replacement for the factory bulb, with OEM-size sockets. The bulbs have been tested for reliability over time, with an expected life of 40,000 hours.

    This is an exclusive product, designed and developed by Diode Dynamics LLC.

    Installation:

    The whole system is 100% plug-and-play. No cutting, no ballasts, no wiring to your battery. Here's how to install:

    1. Remove your factory bulb, and replace it with the PRISM bulb.
    2. Plug the PRISM bulbs into an RGB controller. 
    3. Plug RGB controller into your factory socket, with included signal wire.

    It's as easy at that! Installation should take 10-15 minutes on most vehicles.

     

    Included in your order:

    • - (2) LED Halo Rings
    • - Power connector wire (plugs directly into your factory socket) 
    • - RGB Controller (optional, see below)
    • - Three-year replacement warranty

     

    You must use an RGB controller to power and control the bulbs. The bulbs use a standard 4-pin connector, with a common positive (+) wire.

    These bulbs are compatible with all other Diode Dynamics RGB products, such as their RGB controllers, RGB 2-way splitters, and RGB extension wires.

    All Diode Dynamics RGB controllers come with four (4) RGB outputs. For example, if you would like to purchase a set of PRISM bulbs for your fog lights and DRLs, you would just need one controller. If you already have an RGB controller for your footwell lighting, you can simply add these to that controller if you'd like. Keep in mind that all RGB lights on one controller will work together.

    Customers who bought this item also bought
    Picture of Diode Dynamics FRS/BRZ Multicolor Fog/DRL LED Bulb Kit H11
    Picture of Remark Axleback Muffler Delete Single Wall Burnt Tip - 2013-2020 BRZ/FR-S/86

    Remark Axleback Muffler Delete Single Wall Burnt Tip - 2013-2020 BRZ/FR-S/86

    Fits 2013-2020 Subaru BRZ, Scion FR-S, and Toyota 86
    $441.75 $390.00
    Picture of LED WERKS Blue Dome Light Bulb