Search
SHOP CATEGORIES
    Menu Close

    Morimoto - Full Retrofit kit for Scion FRS.

    SKU: FRFK-FRS
    Manufacturer: Morimoto
    *
    *
    *
    *
    *
    $150.00
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    Morimoto - Full Retrofit kit for Scion FRS.

     

    DESCRIPTION
    Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 2012+ Scion FR-S, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!
     
    Morimoto H1 6.0 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The new 6.0 version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models. As the world's biggest Morimoto distributor, all projectors tuned to perfection here in our shop.

    Morimoto XB Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%!

    Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

    Morimoto Relay Harnesses: Have fulled-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.

    Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds.

    Featured: By you! You can check out a whole thread of user-written reviews of the FR-S Retro-Quik Kit on the FT86 Forums!
     
    Trusted: With the Internet's best reputation for unbeatable products, prices, and customer service; The Retrofit Source is trusted by car guys world-wide, so we invite you to Contact Us today with your questions. Whether you need a recommendation on parts, have a tech question, or even a wholesale inquiry: our customer service team is here to help!

     

    WHAT'S INCLUDED

    • STANDARD EQUIPMENT:

    • 2x Projectors:Morimoto Mini H1 6.0
    • 2x Brackets:FR-S Specific
    • All Hardware:Automotive Grade Stainless
    • *Warranty:Five Years
    • OPTIONAL EQUIPMENT:

    INSTALLATION & PERFORMANCE

    • 4 hrs Install Time
      • Time to install:
      • 4 hours (estimate)
    • Cutting Involved
      • Cutting involved:
      • Application Dependent
    • Performance Brightness
      • Performance:
      • Brighter
    0.0 0
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Morimoto - Full Retrofit kit for Scion FRS.

     

    DESCRIPTION
    Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 2012+ Scion FR-S, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!
     
    Morimoto H1 6.0 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The new 6.0 version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models. As the world's biggest Morimoto distributor, all projectors tuned to perfection here in our shop.

    Morimoto XB Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%!

    Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

    Morimoto Relay Harnesses: Have fulled-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.

    Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds.

    Featured: By you! You can check out a whole thread of user-written reviews of the FR-S Retro-Quik Kit on the FT86 Forums!
     
    Trusted: With the Internet's best reputation for unbeatable products, prices, and customer service; The Retrofit Source is trusted by car guys world-wide, so we invite you to Contact Us today with your questions. Whether you need a recommendation on parts, have a tech question, or even a wholesale inquiry: our customer service team is here to help!

     

    WHAT'S INCLUDED

    • STANDARD EQUIPMENT:

    • 2x Projectors:Morimoto Mini H1 6.0
    • 2x Brackets:FR-S Specific
    • All Hardware:Automotive Grade Stainless
    • *Warranty:Five Years
    • OPTIONAL EQUIPMENT:

    INSTALLATION & PERFORMANCE

    • 4 hrs Install Time
      • Time to install:
      • 4 hours (estimate)
    • Cutting Involved
      • Cutting involved:
      • Application Dependent
    • Performance Brightness
      • Performance:
      • Brighter