Helix Crystal Clear Side Markers

Quality and fitment are spot on

Got it super fast, and came with replacement yellow LED bulbs to swap out. Got them both installed within 15 minutes and they look great. Does give it a little more personality than the cheaper ebay replacements, plus matches my 10 series paint perfect. For some reason i thought it was a blinker, but it is only a light that comes on when the headlights are on, so definitely going to swap out the yellow with bright white LEDs.

I ordered my Helix Clear Side Marker for my Whiteout FR-S. This Clear side marker option goes seamless with the Whiteout! For a complete noob, install was fairly easy. I did have to refer to a DIY guide I found on the FT86 forums. Definitely a great purchase!

Product was exactly as advertised.  Fit was perfect, and looks awesome!  Very happy with my purchase!

They look awesome on my firestorm FRS. love how i got the white led to go with the clear lens. install was a little harder than expected, not like how it is done in the video which makes it look easy. Overall very happy with my purchase and shout out to the guys at fteightysix for the very speedy delivery.

Takes 10 minutes to install and looks great. I followed this DIY: http://www.ft86club.com/forums/showthread.php?t=11276

I have a 2015 whiteout BRZ and it was a quick install. Perfect for people who want a nice clean look. I have the clear sidemarker with the white LEDs, which I would like to mention the LEDs came out brighter than I thought they would be and are a pure white led (not like those cheap bluish tint ones). Highly recommended

not bad at all it fit in prefect with no problem.

Great Product. Perfect Fit. Install is not hard but can be a little tricky. Looks really good during the day and the White LED bulbs that were included  really completes the headlights at night. Fast Shipping - 100% recomend. For the price and bulbs being included can't beat it.

I love these side markers. They look great and they don't break up the colors of the car like the Orange ones do. They even provided some LEDs for the bulbs.

The markers were shipped quickly, fit well, and look great!  The only issue I had was locating the clip that held the OEM marker in.  The video didn't really show where it was located, so finding it was a little tough.  Once I found the first side, the second side was a breeze to install.  The fit and finish is excellent.  The markers and LED bulb add clean look to my WRB series.Blue.

The side markers were shipped extremely fast.  Makes the car look a lot clearer.  Had a little trouble trying to push the clip to take out the markers but other than that it was a really easy install thank you.  

Looks really clean and lights up very well

Shipping was really fast. The item is solid materials and looks really good and comes with LED bulbs. Install was easy and they have a youtube diy.

This shipped out super fast - I received it when I least expected it (who doesn't love that?)

The installation was pretty smooth. The only errors I ran into were my own fault, I could'nt pull out the old amber markers, but once I got those out, installed the LED bulbs that came with my markers, and clipped them right in.

They look fantastic. They give my white '15 brz a much cleaner look, and the lights match my headlights perfectly.

Would definitely recommend. Great price, great shipping, easy installation. Love it.

There were so many options with these side markers but I think I chose the right ones. Quality is great, fitment is same as OEM if not better.

I recommend these to anyone who can't make up their minds on which ones to buy.

It looks really great and order was shipped fast!

Nice bright LEDs.  Fit great.

This trash does not fit.  The clips are not correct to snap into place. After searching the internet for help I uncover nothing but issues with these side markers From incorrect clips, to water leaking issues. 86speed should be absolutely ashamed for continuing to sell this junk.

Great, but I had to use the factor refector clip for one side. As the one that came with didnt hold yhe

Cheap and light bulbs ?! It's a steal

Fast shipping, easy install!

I caught these on sale for $38.99 during Black Friday, which I think is about all they're worth. Overall I like the look they gave me and I'll be keeping them for a while but I will be searching for something better...
Complaints:
- The LEDs they ship for free are worthless... super dim. If you want people to see your lights in the daytime, buy some bright HP3 LEDs from somewhere.
- The sidemarkers are not a flat surface like OEM - it's hard to notice in their pictures since they don't have good angle shots or a side-on shot. The center of the sidemarker lens is extruded from the rest by about 3mm so that the light can be see from a 90 degree angle. If you want something that looks super flush/OEM I don't recommend these.
- The sidemarkers do not fit as flush against the bumper as OEM. They have about a 3mm edge all the way around which will protrude from your bumper no matter how hard you try to push them in - just overall poor fitment from their mold I guess. If you stare at them it looks like they were installed improperly even though they weren't - but bystanders won't notice.
- The sidemarker housing is a poor reproduction of the original piece from Subaru, the clips are cheaper and the light twist hole isn't fitted well in addition to the fitment/flushness issues I mentioned above.

Installed really easily the first time. Then I went to change the bulb and had a lot more trouble as the clips were not playing nice.

These lights are a must have. I gave it a 4 instead of a 5 because the clips were giving me a hard time but overall they look great and would strongly recommend to anyone who's even considering changing the  stock amber lights.

Great deal especially since they come with LEDs. Tighter fit than OEM, needed to force it in a bit. Hoping removal won't pose any issues.

These are the best ones you can get. The cheesy ones for 1/2 price are junk. You definitely get what you paid for with these.

These are high quality clear side markers. They appear slightly different shape than the stock markers as there is a slight bump - it makes them look a lot better in my opinion.

I personally fiddled a bit to much with one of these and one of the clips became loose, but it was easy to carefully bend the biting pins a bit and add a little gorilla glue gel to fix (it honestly feels more secure now).

If you get the free T10 bulb, be aware that you may need to bend the contact pins for them to work. I was unaware of this and thought I received the wrong bulb type initially (I'm a noob).

Bought these during a promo deal and couldn't be happier. They look great on the car and the clips that come with are much stronger than the oem

These were cheap and pretty good quality with the LED bulbs. Had one small issue where the clip wouldnt stay but pushed it in from the inside till it clipped. Other than that they’re really nice and car looks better than with those ugly orange ones. Definately recommend these

These thinks look fantastic. Especially with some led bulbs installed. My only issue is that it doesnt have the best fit and fin8sh compared to the oem ones. They are a little bulkier and pop out a bit. But besidea that im happy with them.

Removed the old  side markers which were barely being held by the stock clips, installed the new side Markers with ease. The clips actually hold them in place and looks really nice.

Both my sidemarkers were out, had condensation and the LED's were falling apart. At Toyota, the estimate to fix/replace was in the $+200 neighborhood (no sure if it's right or if it was bc I'm a female lol)
These are a great substitute and I was able to change them without any issues. New LED's were included. Thank you.  

Easy to install took me less than 20 minutes and it fits perfect. Its amazing how small changes like this can really change the appearance of the car.

THE PACKAGING WAS GREAT, VERY EASY INSTALL, BUT THE SAME PROBLEM WITH EVERY SIDE MARKER LIGHT IS THE METAL CLIP YOU TRY CLIPPING BACK IN PLACE.
WHENEVER I TRY CLIPPING IT IN, IT SOUNDS LIKE IT CLIPPED THEN FALLS RIGHT OUT, HAPPENED WITH BOTH SIDES. SO AFTER 2 ZIP TIES AND 1 HOUR LATER OF DRILLING A WHOLE THROUGH WHERE THE CLIP IS SUPPOSED TO GO, TO DRILLING A WHOLE THROUGH THE PLASTIC COVERING OF THE WHEEL WELL , MY LIGHT IS HANGING OUT ABOUT A 1/8 OF AN INCH OF WHERE IT IS SUPPOSED TO SIT.
BUT OVERALL THE LIGHT LOOKS GREAT AND IT COULD OF BEEN A 5 MINUTE JOB BUT FRS,BRZ,86 JUST HAVE TO SOLVE THAT CLIP ISSUE.
SIDE NOTE: HAVE TO GET THE WHITE  LED LIGHTS %100 UPGRADE FROM THE ORANGE.